I finally got some time to mess around with the gbs-c aio that I recieved. I connected a jamma board to it via the 5 pin connector near the VGA in and what I got was a terribly washed out image with this grid of interference going over the screen. Played with the switches and the web control and nothing really fixed it. I even tried bypassing the hdmi to VGA built into the unit incase that was the problem and no change.
On a stock gbs8200 board I would just use the rgb po to fix the colors being off but on the aio they are removed, with not alternative controls in the menu.
Just to make sure it wasn't my board or jamma harness I hooked to board to my stock gbs8200 and etekcity VGA to hdmi I would normally use and the signal was much cleaner.
Am I doing something wrong or could my gbs-c aio be defective possibly?