Hi, I have a consolized Neo-Geo MVS and also a Neo-Geo AES and neither of them work correctly with GBS-C AIO. Both systems behave in the same way: Screen freezes multiple times per second, there is some distortion near the top of the screen and the screen jumps up and down a few pixels. Also the overall brightness seems to be a problem, background is randomly grey or brown (it changes every time I turn it off and back on). I'm using an RGB SCART cable from retro-access. Other consoles i have hooked up to the AIO so far work fine and look good. Both systems with the same cable work normally on a FM and OSSC. In the web control panel the log scrolls a ton of these repeating messages as the freezing is happening: .. (debug) ign. length: 0x66 . (debug) ign. length: 0x66 .. (debug) ign. length: 0x66 . (debug) ign. length: 0x66 . (debug) ign. length: 0x66 . (debug) ign. length: 0x66 . (debug) ign. length: 0x66 (the length value can differ) I tried with the sync strip switch in both positions with no visible difference. Is it simply incompatible? Or is there some settings I can try changing? Thanks for any suggestions!