Greetings! I was curious if it would be possible to allow the VGA input port to process a component signal? I have several consoles running through a GScartSW into a PVM, and I'm using the PVM's output passthrough to feed into the GBS-C's VGA input from a BNC to VGA cable. This works great for all of my RGB consoles, but I also have a Wii hooked up in component mode. The signals can pass through the same way through the BNC to VGA cable, but the VGA input on the GBS-C doesn't seem to want to interpret it as component, giving me a washed out green picture over HDMI. If I use component cables from the PVM's output to the component input on the GBS-C it works just fine, I'd just prefer to have as much stuff plugged in and functioning at the same time as I can. Is there any way to force the GBS-C to interpret the signals coming into the VGA port as component?