The Gbscontrol firmware options can be accessed via an web page served by the GBS-C AIO over wifi.
With the GBS-C AIO turned on, use a wifi device (phone, tablet, computer) to search for a wifi network called “gbscontrol” and connect to the "gbscontrol" network.
The default password is qqqqqqqq
Open a browser and navigate to one of the following addresses
http://gbscontrol
http://gbscontrol:80
http://gbscontrol.local
Depending on your device and network one or all of the address above will get you to the Gbscontol firmware menu.
Connecting your GBS-C AIO to your wifi network
Once connected directly the Gbscontrol firmware from the previous direct connection instructions, click on the “System” tab and then on "Connect to WiFi Network"
Enter your network SSID name and password then click "Connect"
The Gbscontrol firmware remembers this network, so it will always try to connect to this network first.
If it can't connect to the wifi network, it will revert to AP mode.
Depending on your accessing device and network the following other addresses can be used to access the "http://gbscontrol:80", "http://gbscontrol", "gbscontrol" or http://gbscontrol.local
The Address "http://gbscontrol.local" requires mDNS support from the operating system on your wifi device, some routers provides support mDMS